刘北平,黄小兵,陈 健,全昌云,刘雄伟.响应曲面法优化芦苇除硅蒸煮工艺[J].中国造纸学报,2013,28(3):36-41 本文二维码信息
二维码(扫一下试试看!)
响应曲面法优化芦苇除硅蒸煮工艺
Optimization of Desilicating in Reed Pulping by Using Response Surface Methodology
  
DOI:10.11981/j.issn.1000-6842.2013.03.36
中文关键词:  蒸煮除硅  黑液  响应曲面法
Key Words:desilication incooking  black liquor  response surface methodology
基金项目:本课题得到湖南省科技厅计划项目(2010GK2006)和湖南省重点学科建设项目(应用化学)的资助。
作者单位
刘北平 湖南文理学院化学化工学院,湖南常德,415000 
黄小兵 湖南文理学院化学化工学院,湖南常德,415000 
陈 健 湖南文理学院化学化工学院,湖南常德,415000 
全昌云 湖南文理学院化学化工学院,湖南常德,415000 
刘雄伟 湖南文理学院化学化工学院,湖南常德,415000 
摘要点击次数: 3750
全文下载次数: 1154
中文摘要:
      以熟石灰、Al(OH)3及NaOH为除硅剂,在芦苇碱法制浆过程中进行除硅蒸煮,同时采用响应曲面分析法研究了熟石灰用量、Al(OH)3用量以及NaOH用量对除硅率的影响。结果表明,熟石灰用量2.70%、Al(OH)3用量0.57%、NaOH用量8.0%,在此条件下,除硅率达到95.92%。
Abstract:
      The desilicating process during reed pulping was described and the effect of the desilicating agents such as white lime and Al(OH)3 on black liquor hardness was discussed. The effect of the dosages of white lime, Al(OH)3 and NaOH on the desilicating rate was studied by means of response surface methodology, and their optimal dosages were as follows: white lime, Al(OH)3 and NaOH were 2.70%, 0.57% and 8.0%, respectively, and the desilicating rate reached 95.9%. Meanwhile, black liquor hardness was not affected by the addition of the desilicating agent.
查看全文  查看/发表评论  下载PDF阅读器  HTML

分享按钮