| 吕洪玉,张 弛,卞学询.钢制烘缸设计中的刚度设计[J].中国造纸学报,2014,29(1):41-43 |
二维码（扫一下试试看！） |
| 钢制烘缸设计中的刚度设计 |
| The Stiffness Design of Steel Yankee Dryer |
| |
| DOI： |
| 中文关键词: 钢制烘缸 刚度 变形 |
| Key Words:steel dryer stiffness deformation |
| 基金项目: |
|
| 摘要点击次数: 4207 |
| 全文下载次数: 1318 |
| 中文摘要: |
| 钢制烘缸是由钢板卷制焊接而成的，具有安全及高热效的特点，但因内侧开有沟槽，在托辊线载荷作用下会发生变形，影响湿纸幅的干燥效果。为此要对钢制烘缸进行刚度设计计算。文章给出了光缸及加肋缸在托辊线载荷作用下的变形计算方法及刚度条件设定。 |
| Abstract: |
| Steel dryer of paper machine with the advantages of safety and high heat efficiency is manufactured by coiling and welding the steel plate, there are grooves on its inner side. The deformation caused by the linear load of the roll underneath will affect the drying effect of the wet web. So calculation for stiffness design is necessary. The shortcomings of calculation based on Mangeldorfs approximation formula was pointed out, and the calculation method of deformation of the dryer with and without the ribs under the linear load, together with the calculation method for stiffness design were presented． |
| 查看全文 查看/发表评论 下载PDF阅读器 HTML |
