周冠成,谷 军,吴伟兵,徐朝阳,龚木荣,戴红旗.高压静电喷雾法制备再生纤维素磁性微球[J].中国造纸学报,2014,29(3):27-31 |
二维码(扫一下试试看!) |
高压静电喷雾法制备再生纤维素磁性微球 |
Preparation of Magnetic Regenerated Cellulose Microspheres via High voltage Electrospraying Method |
|
DOI:10.11981/j.issn.1000-6842.2014.03.27 |
中文关键词: 碱脲体系 高压静电喷雾 再生纤维素磁性微球 超顺磁性 |
Key Words:NaOH/Urea/H2O solvent system high voltage electrospraying magnetic cellulose microspheres super paramagnetism |
基金项目:国家自然科学基金资助项目(No. 31200453,31300483);江苏省自然科学基金(No. BK20130971);江苏高校优势学科建设工程资助项目。 |
|
摘要点击次数: 3524 |
全文下载次数: 1466 |
中文摘要: |
以Fe3O4纳米颗粒与纤维素碱脲溶液的混合液为原料,利用高压静电喷雾法制备了再生纤维素磁性微球(M RCMS)。探讨了Fe3O4负载量对M RCMS物理结构的影响,并用扫描电镜(SEM)、X射线衍射仪(XRD)、热重分析仪(TGA)、振动样品磁强计(VSM)和透射电镜(TEM)对产品进行表征。结果表明,随Fe3O4负载量的增加,高压静电喷雾过程中M RCMS的成球性、均一性、保水能力和孔隙结构变差,比表面积增大,但Fe3O4晶体结构和粒径未发生变化,M RCMS热稳定性良好并具备超顺磁性。 |
Abstract: |
Magnetic regenerated cellulose microspheres(M RCMS) were obtained from a mixture of Fe3O4 and cellulose in NaOH/urea aqueous solution via high voltage electrospraying method. The influences of the loading amounts of Fe3O4 on the process of electrospraying as well as the morphology and physical structure of M RCMS were studied. The products were investigated by means of scanning electron microscope(SEM), X ray diffractometer(XRD), thermogravimetric analysis(TGA), vibrating sample magnetometer(VSM) and transmission electron microscope(TEM). The balling ability, uniformity, water retention and pore structure of M RCMS became worse with the increasing of the amount of Fe3O4, but the specific surface area of M RCMS was larger. The crystal structure of Fe3O4 showed no changes during the process of loading. M RCMS had good thermal stability and super paramagnetism. |
查看全文 查看/发表评论 下载PDF阅读器 HTML |