戴 歆,刘 波,钱 爽,任 浩,刘 鹤.浸渍慈竹木质素酚对纸张强度性能的影响[J].中国造纸学报,2015,30(2):29-33 本文二维码信息
二维码(扫一下试试看!)
浸渍慈竹木质素酚对纸张强度性能的影响
Application of Bamboo Lignophenols in Pulp Fiber Composites
  
DOI:10.11981/j.issn.1000-6842.2015.02.29
中文关键词:  慈竹  木质素酚  纸浆纤维  浸渍
Key Words:Sinocalamus Affinis  lignophenol  pulp fiber  impregnation
基金项目:国家自然科学基金青年基金(51203075);江苏省自然科学基金青年基金(BK2012420);2014年江苏省普通高校学士学位研究生科研创新计划(KYLX_0882)。
作者单位
戴 歆1 1.南京林业大学轻工科学与工程学院,江苏南京,210037 
刘 波1 1.南京林业大学轻工科学与工程学院,江苏南京,210037 
钱 爽1 1.南京林业大学轻工科学与工程学院,江苏南京,210037 
任 浩1,* 1.南京林业大学轻工科学与工程学院,江苏南京,210037 
刘 鹤2 2.中国林业科学研究院林产化学工业研究所, 江苏南京, 210042 
摘要点击次数: 3659
全文下载次数: 1266
中文摘要:
      以慈竹为原料,利用相分离法将其中的天然木质素转化为木质素酚。对木质素酚进行了结构表征,并将其用于纸张浸渍,研究了浸渍前后纸张的物理性质。结果表明,慈竹木质素酚质均相对分子质量2884、多分散系数1.60,易溶于丙酮、乙醇、四氢呋喃等常用有机溶剂;相同时间内,未分丝帚化桉木浆成纸对木质素酚(木质素酚丙酮溶液质量浓度为9.13 g/L)的吸收量(12%)略高于分丝帚化桉木浆成纸的吸收量(10%);木质素酚浸渍后纸张的抗张强度、伸长率、耐破度、撕裂度等明显提高,且分丝帚化桉木浆成纸强度提高幅度更大。
Abstract:
      In this study, lignophenols were separated from bamboo (Sinocalamus Affinis) using phase separation system.Besides its structure features were analyzed, the resulted lignophenols were used to impregnate pulp fibers to form paper sheets composites.The results showed that the weight-average molecular weight of bamboo lignophenols (Lps) was 2884, which easily dissolved in common organic solvent such as acetone, ethanol and tetrahydrofuran, etc., dispersion coefficient of the molecular weight was 1.60.The absorption amount (12%) of Lps (the concentration of Lps acetone solution was 9.13 g/L) in the paper made of non-fibrillated eucalyptus pulp fibers was slightly higher than that (10%) in the paper made of fibrillated eucalyptus pulp fibers at the same impregnating time.The physical properties of tensile strength, elongation, bursting, tearing etc of the paper impregnated with Lps were significantly improved, more significant improvement of physical strength was founded in the paper made of fluffy short pulp fibers.It indicated that the amount of absorbed Lps was as same important as the properties of pulp fibers.This hinted that it was necessary to adjust the properties of both Lps and pulp fibers to get the best mechanical characteristics of composites.
查看全文  查看/发表评论  下载PDF阅读器  HTML

分享按钮