| 孔令波,刘焕彬,李继庚,尹勇军.基于工艺流程的纸机干燥部建模与模拟[J].中国造纸学报,2015,30(4):44-50 |
二维码（扫一下试试看！） |
| 基于工艺流程的纸机干燥部建模与模拟 |
| Modeling and Simulation of Paper Machine Dryer Section Based on Its Process Flow |
| |
| DOI：10.11981/j.issn.1000-6842.2015.04.44 |
| 中文关键词: 纸机 干燥部建模 干燥工艺流程 |
| Key Words:paper machine dryer section modeling drying process |
| 基金项目:华南理工大学制浆造纸工程国家重点实验室开放基金(201422)。 |
|
| 摘要点击次数: 4781 |
| 全文下载次数: 2019 |
| 中文摘要: |
| 基于三段通汽式干燥部工艺流程，在“输入已知、输出未知”和“先烘缸、再通风、后纸张”的原则指导下，以烘缸组为最小建模单元，根据序贯模块法的基本思路，构建了纸机干燥部的静态模型。以某新闻纸机干燥部为对象进行模拟，给出了进出各模块的物流和能流信息，模拟结果与该纸机实际运行情况基本一致。该模型符合纸机干燥部工艺流程，可以用来模拟各模块之间的物流和能流信息，便于为干燥部用能分析提供依据。 |
| Abstract: |
| Based on the drying process of three-stage steam heating paper machine dryer section, a static model for paper machine dryer section was developed using sequential modular approach. The input parameters of the model were known and the output parameters were unknown. The dryer group was chose as the basic modeling unit. The cylinder modular, ventilation modular and paper modular were built consequently according to the drying techniques. As a case study, the static model of a newsprint machine dryer section was then constructed according to its specific drying process and conditions. The mass and energy flows information of each basic modular were presented in the results. The simulated results were basically consistent with the practical operation of the paper machine. The model was in line with the drying techniques and it could be useful for energy analysis in dryer section. |
| 查看全文 查看/发表评论 下载PDF阅读器 HTML |
