何 晶,陈树润,沙九龙,王 晨,张 辉.CMC对漂白针叶木浆悬浮液屈服应力的影响及其应用[J].中国造纸学报,2017,32(1):27-31 本文二维码信息
二维码(扫一下试试看!)
CMC对漂白针叶木浆悬浮液屈服应力的影响及其应用
Influence of the Addition of CMC on the Yield Stress of NBKP Suspension and Its Application in Pulp Transporting and Mixing
  
DOI:10.11981/j.issn.1000-6842.2017.01.27
中文关键词:  漂白针叶木浆  CMC  纤维悬浮液  屈服应力  能量耗散因子
Key Words:needles of bleached kraft pulp (NBKP)  CMC  fiber suspension  yield stress  energy dissipation factor
基金项目:南京林业大学江苏省制浆造纸科学与技术重点实验室开放基金(201609);江苏高校优势学科建设工程资助项目(PAPD)。
作者单位
何 晶1 1.南京林业大学江苏省制浆造纸科学与技术重点实验室江苏南京210037 
陈树润1 1.南京林业大学江苏省制浆造纸科学与技术重点实验室江苏南京210037 
沙九龙1 1.南京林业大学江苏省制浆造纸科学与技术重点实验室江苏南京210037 
王 晨1 1.南京林业大学江苏省制浆造纸科学与技术重点实验室江苏南京210037 
张 辉1,2,* 1.南京林业大学江苏省制浆造纸科学与技术重点实验室江苏南京2100372.南京林业大学江苏省林业资源高效加工利用协同创新中心江苏南京210037 
摘要点击次数: 4433
全文下载次数: 1117
中文摘要:
      通过向漂白针叶木浆中添加CMC来改善纸浆悬浮液的流变特性,并对纸浆悬浮液的屈服应力进行了研究。结果表明,在稳态剪切条件下,纸浆悬浮液的屈服应力τy随浆浓Cm的增大而迅速增大,两者符合指数关系τy=aCbm,且添加CMC不影响两者的指数关系;对于浓度一定的纸浆悬浮液,随CMC添加量的增加,纸浆悬浮液的屈服应力先减小后增大,当添加相对绝干浆质量约1.5%的CMC时,纸浆悬浮液的屈服应力显著减小;随浆浓的增大,CMC对其屈服应力的影响也越来越显著,向浆浓为4%的漂白针叶木浆中添加1.5% CMC时,纸浆悬浮液的屈服应力下降最多,降低了16.2%,且纸浆的搅拌能耗明显降低,降低约40.6%;此外,添加CMC会降低纸浆初始流态化时的能量耗散因子εF,使得纸浆更易于输送。实验结果可为漂白针叶木浆的输送、筛选和混合等过程的工艺节能降耗和装备技术研发与优化提供理论依据。
Abstract:
      Improvement of the rheological properties, including the yield stress, of the needles of bleached kraft pulp (NBKP) suspension was studied through adding CMC. Results showed that the yield stress increased rapidly with the pulp suspension concentration increasing under steady-state shear conditions, followed an exponent equation, and adding CMC did not affect the relationship. For a given concentration of the pulp suspension, its yield stress would increase firstly and, then, reduce with the increase of CMC dosage, and when adding 1.5% CMC (on oven dry pulp), the yield stress reduced most significantly. With the pulp suspension concentration increasing, the impact of adding CMC on the yield stress was more and more obvious, and when 1.5% of CMC was added into the pulp of 4% concentration, the yield stress reduced the most, reaching 16.2%, which could significantly reduce the energy consumption of the pulp agitation up to about 40.6%. Adding CMC might also reduce the energy dissipation factor at the onset of pulp suspension fluidization, which made it easier to be transported.
查看全文  查看/发表评论  下载PDF阅读器  HTML

分享按钮