高雅丽,周晓贤,倪书振,陈晓倩,傅英娟,张凤山.甲酸木质素纳米颗粒的制备及疏水性能研究[J].中国造纸学报,2024,39(2):125-131 本文二维码信息
二维码(扫一下试试看!)
甲酸木质素纳米颗粒的制备及疏水性能研究
Study of Preparation and Hydrophobic Properties of Formic Acid Lignin Nanoparticles
投稿时间:2024-01-12  修订日期:2024-02-18
DOI:10.11981/j.issn.1000-6842.2024.02.125
中文关键词:  甲酸  纳米颗粒  木质素  疏水性能  淀粉膜
Key Words:formic acid  nano particle  lignin  hydrophobicity  starch film
基金项目:国家自然科学基金青年项目(22208175);齐鲁工业大学培优项目(2023PY032)。
作者单位邮编
高雅丽 齐鲁工业大学(山东省科学院)轻工学部制浆造纸科学与技术教育部重点实验室山东济南250353
齐鲁工业大学(山东省科学院)生物基材料与绿色造纸国家重点实验室山东济南250353 
250353
周晓贤 齐鲁工业大学(山东省科学院)轻工学部制浆造纸科学与技术教育部重点实验室山东济南250353
齐鲁工业大学(山东省科学院)生物基材料与绿色造纸国家重点实验室山东济南250353 
250353
倪书振* 齐鲁工业大学(山东省科学院)轻工学部制浆造纸科学与技术教育部重点实验室山东济南250353
齐鲁工业大学(山东省科学院)生物基材料与绿色造纸国家重点实验室山东济南250353 
250353
陈晓倩 齐鲁工业大学(山东省科学院)轻工学部制浆造纸科学与技术教育部重点实验室山东济南250353
齐鲁工业大学(山东省科学院)生物基材料与绿色造纸国家重点实验室山东济南250353 
250353
傅英娟 齐鲁工业大学(山东省科学院)轻工学部制浆造纸科学与技术教育部重点实验室山东济南250353
齐鲁工业大学(山东省科学院)生物基材料与绿色造纸国家重点实验室山东济南250353 
250353
张凤山* 山东华泰纸业股份 有限公司 & 山东黄三角产业技术研究院有限公司山东东营257335 257335
摘要点击次数: 641
全文下载次数: 223
中文摘要:
      本研究以玉米秸秆、杨木及松木为原料,利用不同液比的甲酸与原料(1∶10,1∶9,1∶8和1∶7)制浆,从制浆黑液中分离得到甲酸木质素,进一步制得甲酸木质素纳米颗粒,探究了不同甲酸木质素的酚羟基含量差异。结果表明,3种原料甲酸木质素具有木质素的基本结构特征,液比1∶9时制得3种原料甲酸木质素酚羟基含量分别为2.69、2.82、3.09 mmol/g。水接触角实验结果表明,3种原料甲酸木质素压片具有较强的亲水性。将甲酸木质素纳米颗粒用于制备甲酸木质素纳米颗粒/淀粉复合膜,复合膜的水接触角显著增加,其疏水性能与甲酸木质素的原料种类和制浆液比有关。经4个月老化后,复合膜的疏水性能进一步增强,3种原料甲酸木质素纳米颗粒/淀粉复合膜的水接触角最高分别可达127.2°、125.1°和123.5°。研究结果对增强木质素的疏水性能及扩展疏水性膜材料的应用具有积极意义。
Abstract:
      In this study, formic acid lignin and its nanoparticles were isolated and prepared from corn stover, poplar and pine wood with different liquid ratios (1∶10, 1∶9, 1∶8, and 1∶7) using formic acid of pulping process. The difference of phenolic hydroxyl contents in different formic acid lignin was explored. The results showed that the formic acid lignin obtained from the three raw materials had the basic characteristic structure of lignin, and the phenolic hydroxyl contents of lignin at the liquid ratio of 1∶9 was 2.69, 2.82, and 3.09 mmol/g, respectively. The results of water contact angle experiments showed that the lignin compression tablets of three raw materials had strong hydrophilicity. Formic acid lignin nanoparticles were used for the preparation of formic acid lignin nanoparticles/starch composite films, and the contact angle of composite films was significantly increased, and the hydrophobic properties were influenced by the type of raw materials and liquid ratios. The contact angle of composite films after four months aging was further enhanced, and corn stover, poplar and pine formic acid lignin/starch composite films had the highest water contact angles of 127.2°, 125.1° and 123.5°, respectively. The study results played a positive role in promoting hydrophobic performance of lignin, and developing applications of hydrophobic films.
查看全文  查看/发表评论  下载PDF阅读器  HTML

分享按钮