|
二维码（扫一下试试看！） |
| Analysis of Fiber Morphology in Tissue Paper Production(Ⅲ) |
| |
| DOI： |
| Key Words:virgin fiber； recycled fiber； tissue paper； fiber morphology |
| Fund Project:国家质检总局质检公益性行业科研专项经费资助项目（2012104018-1）；广东省质量技术监督局立项科研项目（2011ZZ03）。 |
| Author Name | Affiliation | | 余伟梅1 | 1.广东省东莞市质量监督检测中心（国家纸制品质量监督检验中心），广东东莞，523808 | | 陈春霞1，* | 1.广东省东莞市质量监督检测中心（国家纸制品质量监督检验中心），广东东莞，523808 | | 陈润权1 | 1.广东省东莞市质量监督检测中心（国家纸制品质量监督检验中心），广东东莞，523808 | | 邱玉桂1，2 | 1.广东省东莞市质量监督检测中心（国家纸制品质量监督检验中心），广东东莞，523808；2.华南理工大学制浆造纸工程国家重点实验室，广东广州，510640 |
|
| Hits: 4221 |
| Download times: 1558 |
| Abstract: |
| Fiber morphologies of the virgin pulp and the tissue paper produced from the pulp (from mill F) as well as the waste paper pulp and the tissue paper produced from the pulp (from mill G) were analyzed, to figure out the fibrous morphology differences. Furthermore, by adding different percent of DIP to virgin pulp to figure out the effect of the DIP on the fiber morphology of the mixed pulps.Results showed that, with increasing percent of DIP, the mixed pulps had higher Rfluor and Eric value, which was no more than 20 mg/kg when the DIP percent was less than 40%. With increasing percent of DIP, there were more mechanical pulp fiber and undisintegratedfiber bundles． |
| View Full Text View/Add Comment Download reader HTML |
