|
二维码（扫一下试试看！） |
| The Dryer Section Modeling Based on Integrated Analysis of Material, Energy and Exergy Flows |
| |
| DOI： |
| Key Words:dryer section； modeling； energy analysis； exergy analysis |
| Fund Project:广东省自然科学基金资助项目(S2011010001367)；中山市科技计划资助项目(20114A161，2013A3FC0267)。 |
| Author Name | Affiliation | | 周艳明1 | 1.电子科技大学中山学院,广东中山，528402 | | 刘焕彬2 | 2.华南理工大学制浆造纸工程国家重点实验室,广东广州，510640 | | 李继庚2 | 2.华南理工大学制浆造纸工程国家重点实验室,广东广州，510640 |
|
| Hits: 3435 |
| Download times: 1947 |
| Abstract: |
| Considering the present modeling and energy-using analysis of dryer section are not able to effectively integrate the material, energy and exergy flows analysis, the complex and multi-material heat and mass transfer processes of the multi-cylinder dryer section were divided into a number of relatively independent functional units and established the corresponding unit models by using the object-oriented method, the establishment of the unit model of the web was emphasicly introduced. All of the models possessed the analysis function of energy and exergy, and the analysis could be integrated with the traditional material flow analysis. The module flow diagram of dryer section was constructed based on the sequential modular approach. Case study showed that the developed models were reasonable and the simulation results were nearly consistent with the actual measuring results. The amount of fresh steam could be saved and specific consumption of stream reduced by means of adjusting the inlet flow or pressure of fresh steam of different dryer sections. |
| View Full Text View/Add Comment Download reader HTML |
