|
二维码(扫一下试试看!) |
Research on Modification of Activated Carbon from Deinking Sludge |
|
DOI:10.11981/j.issn.1000-6842.2019.03.31 |
Key Words:deinking sludge; activated carbon; activated carbon modifying; Cr(VI)ion adsorption |
Author Name | Affiliation | WAN Yueliang | Tianjin Key Laboratory of Pulp & Paper, Tianjin University of Science & Technology, Tianjin, 300457 | MENG Xiangmei | Tianjin Key Laboratory of Pulp & Paper, Tianjin University of Science & Technology, Tianjin, 300457 | FENG Kun | Tianjin Key Laboratory of Pulp & Paper, Tianjin University of Science & Technology, Tianjin, 300457 | KONG Huazheng | Tianjin Key Laboratory of Pulp & Paper, Tianjin University of Science & Technology, Tianjin, 300457 | LIU Tingzhi* | Tianjin Key Laboratory of Pulp & Paper, Tianjin University of Science & Technology, Tianjin, 300457 |
|
Hits: 4019 |
Download times: 1400 |
Abstract: |
The activated carbon prepared from deinking sludge was modified and applied to the adsorption of Cr(VI)ion, the optimal modification conditions were determined as follows: modifier was 10 mol/L HNO3, 1∶15 (m∶V), modification time 2.0 h. The modified activated carbon was used to remove Cr(VI) ion from waste water. When the amount of modified activated carbon was 5 g/L, the removal rate and adsorption capacity of Cr(VI)ion were 83.9% and 25.17 mg/g, respectively, and the adsorption capacity increased by 140.3% compared with that of unmodified activated carbon, the iodine adsorption value and methylene blue adsorption value of the activated carbon were 543.92 mg/g and 103.5 mg/g respectively, the iodine adsorption capacity increased by 28.9%. The specific surface area of activated carbon was 1020.161 m2/g, increased by 42.6%, the total pore volume was about 0.608 cm3/g, increased by 72.4% and the mesopore volume was about 0.393 cm3/g, increased by 14.2%, based on the calculation by the N2 adsorption-desorption experiment. |
View Full Text View/Add Comment Download reader HTML |