张小雪,张丽丽,苗海滨.压力筛性能影响因素仿真分析[J].中国造纸学报,2018,33(1):56-60 本文二维码信息
二维码(扫一下试试看!)
压力筛性能影响因素仿真分析
Simulated Analysis of the Influence Factors on Performance of Pressure Screen
  
DOI:10.11981/j.issn.1000-6842.2018.01.56
中文关键词:  压力筛  转子  流体动力学  仿真模拟
Key Words:pressure screen  rotor  computational fluid dynamics  analogue simulation
基金项目:山东省自然科学基金(ZR2015FM021);山东省高等学校科技计划(J15LB01)。
作者单位
张小雪1 1. 齐鲁工业大学机械与汽车工程学院山东济南250353 
张丽丽1,* 1. 齐鲁工业大学机械与汽车工程学院山东济南250353 
苗海滨2 2.山东杰锋机械制造有限公司山东滨州256206 
摘要点击次数: 3579
全文下载次数: 2859
中文摘要:
      基于计算机流体动力学(CFD)技术,建立了MUS20外流式压力筛物理模型,对压力筛筛浆过程进行数值模拟,获取压力筛内速度场和压力场,分析不同操作参数下流场压力、速度的变化规律,研究转子旋翼和筛鼓之间间隙及转子的转速对浆料筛选性能和压力筛功耗的影响。结果表明,当转子旋翼和筛鼓之间间隙为3 mm时,压力筛反冲洗效果最好;当转子转速为470 r/min时,功耗相对较低。
Abstract:
      Based on the computer fluid dynamics (CFD) technology, the physical model of MUS20 outflow pressure screen was established. The velocity and pressure fields were obtained by numerical simulation of pulp screening. The variation law of perssure and velocity of the flow field in different operation conditions was analyzed. The influences of the clearance between the foil and screen cylinder and the rotor speed on screening performance and power consumption were studied.The result indicated that the screen had the best backflushing effect when the clearance between the foils and cylinder was 3 mm, and the power consumption was comparative low when the rotor speed was 470 r/min.
查看全文  查看/发表评论  下载PDF阅读器  HTML

分享按钮